Steam cleaner instructions and tips

Instructions for using the steam cleaner

1. Attach the accessories. Push your chosen tool (like the steam gun or floor nozzle) into place until it clicks. For floor cleaning, connect the extension tubes together, then connect them to the steam gun and the floor nozzle.

2. Fill the water tank. Pull the water tank straight up and out. Fill it with tap water up to the “MAX” line. Put the tank back in and press down until it clicks into place.

⚠️ NOTE: Don't use contaminated water and any cleaning products.

1. Turn on the machine. Plug it into a socket and press the ON switch. The green light will flash while it heats up. Wait until the green light stays on.

2. Start cleaning. Press the steam lever to release steam.

3. Control the steam. Use the steam volume switch to control how much steam comes out. High steam for tough jobs. Low steam for delicate areas. Child lock/no steam is safety mode.

4. Refill water tank when necessary. If the red light turns on and you hear a beep, it needs more water. Fill the tank as before and continue cleaning.

5. Turn off the machine. Press the OFF switch. Hold the steam lever until no more steam comes out (this releases pressure). Turn the steam switch to child lock (backwards). Unplug it.

6. Final step. Drain any leftover water from the tank.

Tips for cleaning different areas

Floors (tiles, vinyl, etc.)

• Sweep and vacuum first

• Attach the floor cloth to the nozzle (Velcro side up).

• Press the floor nozzle onto the cloth.

• Start steaming slowly over the floor.

Tough dirt (corners, bathroom fittings, etc.)

• Use the small round brush. It scrubs as you steam which is ideal for grout lines, taps, and tough dirt. ⚠️ NOTE: May scratch delicate surfaces.

Gentle cleaning (furniture, kitchen, textiles)

• Use the manual (hand) nozzle with the cloth cover. Great for mirrors, countertops, and shower doors.
• For clothes or curtains: Steam from 10-20 cm away to freshen without soaking.